Home → Kurzweil 3000 (K3000) → Scanner Troubleshooting & Information → Configuration: Fujitsu Scanners
4.13. Configuration: Fujitsu Scanners
Welcome to the Fujitsu Scanner configuration site. Below you will see a list of configuration changes made to specific models of Fujitsu scanners to work with Kurzweil 3000. These configuration changes should not be made unless you expierence issues with your scanner, using the default settings.
| FI6110 | FI6670 |
FI6110
Last Updated: July 2015
Applies to Versions: Kurzweil 3000 v14 for Windows 7 x86; may apply to other versions
Issue Summary:
You may encounter issues scanning with a Fujitsu FI6110 scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to possibly fix your scanning issues.
Troubleshooting Steps:
1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7
2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210
3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.
Download/install Fujitsu's PaperStream IP scanner driver.
4. Close out of K3000.
5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.
6. In the Scanner Configuration window, use the following settings:
Select the Select the PaperStream IP fi6110 [twain] driver
Hold Scanner: Never
Force Duplex Supported: On
Simulate Xfer Ready: Always On
Click the Done button to apply the settings
7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...
Select the Select the PaperStream IP fi6110 [twain] driver and click OK to initialize it.
8. Attempt to scan a document in K3000 as normal.
FI6670
Last Updated: July 2015
Applies to Versions: Kurzweil 1000 v14 for Windows 7 x64; may apply to other versions
Issue Summary:
You may encounter issues scanning with a Fujitsu FI6670 scanner in Kurzweil 1000 (K1000). Follow the Troubleshooting Steps below to possibly fix your scanning issues.
Troubleshooting Steps:
1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7
2. Make sure you're using the latest version of K1000.
3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.
4. Close and exit out of K1000.
5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K1000 interfaces with your scanner drivers.
6. In the Scanner Configuration window, use the following settings:
Select the Fujitsu FI6670 (TWAIN) driver
Hold Scanner: Never
Force Duplex Supported: On
Simulate Xfer Ready: Always On
Click the Done button to apply the settings
7. Run K1000. In your Scanner Settings, select the TWAIN driver as the Scanner Source.
8. Make sure to save your settings in K1000 if the scan was successful.