Home → Kurzweil 1000 (K1000) → Scanner Troubleshooting & Information → Epson DS 1630
4.9. Epson DS 1630
Last Updated: Jan 2023
Applies to: Using the Epson DS 1630 with Kurzweil 1000, may apply to Kurzweil 3000
Problem:
The Epson DS 1630 may not scan properly with Kurzweil. This issue was encountered with using Kurzweil 1000 v14, combined with Windows 10.
Solution:
Use ScanConf.exe to modify the settings of the driver, then initialize it within Kurzweil.
Only the WIA + TWAIN driver worked. The mutually exclusive TWAIN or WIA drivers both caused a crash when selected under Scanner Setup > Select Scanner during scanner initialization.
Based on testing, either ADF could be configured to work, or Flatbed. Could not find a configuration to get both to work together.
For ADF:
Most of the settings at default, Hold Scanner = Never, Simulate Xfer Ready = Always On, Force ADF Ready = On
These settings would allow the ADF to work, but Flatbed scanning would repeatedly scan.
For Flatbed:
Force Scanner Ready = On, Initialize ADF = Initially Disable ADF, Force ADF Ready = Off, Require ADF Ready = Off, Hold Scanner = Never, Simulate Xfer Ready = Always On
See attached screenshot for Scanner Configuration settings of the flatbed.